Dragon Power 1000W 80 Plus Platinum Fully Modular ATX 3.0 Power Supply
Fuel your next-generation gaming rig, AI training desktop, or extreme rendering workstation with the clean electrical engineering of the Dragon Power 1000W 80 Plus Platinum Power Supply. Specifically engineered to shield sensitive computer components against severe voltage dips, dirty power profiles, and unexpected brownouts common across Myanmar's electrical grid, this heavy-duty 1000-watt power supply unit (PSU) delivers continuous, rock-solid current delivery under maximum sustained processing loads.
The Dragon Power 1000W features an elite 80 Plus Platinum Efficiency Certification, guaranteeing up to 92% power conversion efficiency at typical loads. Built with an advanced fully modular cable design and native ATX 3.0 / PCIe 5.0 compliance, it includes a dedicated high-power 12VHPWR cable to feed modern graphics cards effortlessly. This architecture minimizes cable clutter, improves internal case airflow, and reduces thermal dissipation inside your chassis—a critical advantage during hot tropical summer months.
Key Features & PC Hardware Highlights
- 1000W Continuous Power Output: Provides a continuous, true-rated 1000 Watts of steady electricity, comfortably handling the heavy power transients of overclocked multi-core CPUs and top-tier graphics cards.
- 80 Plus Platinum Certified Efficiency: Drastically cuts down on electricity waste and reduces internal heat buildup by converting incoming AC wall current with world-class thermal efficiency.
- Native ATX 3.0 & PCIe Gen 5.0 Ready: Outfitted with a premium 12+4 pin 12VHPWR connector capable of piping up to 600W directly to modern high-end GPUs without requiring messy multi-plug adapter cables.
- Fully Modular Cable Management Array: Allows you to attach only the power cables your custom build requires, completely clearing the internal case paths to optimize airflow and lower dust retention.
- Heavy-Duty Single +12V Rail Design: Routes primary power through an ultra-stable, high-amperage single +12V rail configuration to guarantee reliable power delivery to your graphics processing array.
- 140mm Smart Fluid Dynamic Bearing Fan: Features an intelligent, temperature-controlled 140mm cooling fan with a zero-RPM mode that completely turns off during light desktop tasks for whisper-silent acoustics.
- Industrial-Grade Protective Circuits: Built with an impenetrable line of safety guards including Over-Current (OCP), Over-Voltage (OVP), Under-Voltage (UVP), Short-Circuit (SCP), Over-Power (OPP), and Over-Temperature Protection (OTP).
Technical Specifications Table
Cross-reference the absolute physical layout limits, connector distributions, and rail metrics for the Dragon Power 1000W Platinum PSU:
| Specification Parameter | Official Factory Technical Details |
|---|---|
| Brand & Model Series | Dragon Power 1000W (Platinum Modular Edition) |
| Form Factor Hardware Standard | Intel ATX 3.0 / PCIe 5.0 Compliant Layout |
| Continuous Wattage Capacity | 1000 Watts Sustained Output Ceiling |
| Efficiency Certification Rating | 80 PLUS Platinum Certified (Up to 92% Energy Efficiency) |
| Power Factor Correction (PFC) | Active PFC (>0.90 typical at full load) |
| Input AC Operating Range | 200V AC to 240V AC (Optimized for Myanmar grid voltage dynamics) |
| Cooling Fan Size & Architecture | 140mm Smart Fluid Dynamic Bearing (FDB) Fan with Smart ECO Thermal Switch |
| Main Motherboard Connector | 1x 24-Pin (20+4) ATX Interface Cable (Fully Modular) |
| CPU EPS 12V Connectors | 2x 8-Pin (4+4) EPS Power Interfaces |
| PCIe Gen 5.0 12VHPWR Cable | 1x 16-Pin (12+4) High-Output Cable (600W Rated Delivery) |
| Standard PCIe GPU Connectors | 4x 8-Pin (6+2) PCIe Power Rails |
| SATA & Peripheral Interfaces | 8x SATA Connectors | 4x Molex 4-Pin Peripheral Ports |
| Authorized Local Warranty | 2-Year Full Distributor Replacement Protection Package |