Safeguard your desktop build with highly reliable, continuous energy using the Cooler Master MWE 500 Bronze V2 230V Power Supply (Model: MPE-5001-ACABW-B). Regarded as one of the most efficient, cost-effective, and highly recommended budget power supplies for custom PC builds in Myanmar, this unit provides exceptional value. Engineered with advanced DC-to-DC + LLC circuit technology and a powerful single +12V rail layout, it delivers pristine voltage stability under heavy system loads. Whether you are assembling an office desktop setup in Yangon or constructing an entry-level gaming computer system in Mandalay, the MWE 500W V2 ensures your internal components run safely and efficiently through continuous daily use.
Key Features & Power Design Advantages
80 PLUS Bronze 230V EU Certified Efficiency
Keep your energy overhead down and lower internal heat production. The MWE 500W V2 boasts an official 80 PLUS Bronze 230V EU certification, guaranteeing a typical electrical efficiency rating of 88% under standard loads. This optimized energy retention prevents unnecessary heat waste, ensuring your computer chassis stays cool during operation.
Advanced DC-to-DC + LLC Circuit Layout
Component safety is paramount when working with custom PC builds. While standard budget power supplies compromise safety with low-tier group regulation layouts, the MWE Bronze V2 utilizes a custom Dual Forward circuit architecture. This configuration safely scales 12V down to 3V and 5V levels with minimal ripple noise, offering clean, uniform power routing directly to your motherboards, storage arrays, and processors.
Thermally Sensitive 120mm HDB Silent Fan
Enjoy a whisper-quiet computing workplace. Equipped with a premium 120mm Hydro Dynamic Bearing (HDB) fan, the hardware dynamically balances intensive system cooling with an ultra-low noise profile. The built-in thermally sensitive fan controller adjusts fan speeds (RPM) continuously based on the exact power draw demands of your system.
Discreet Low-Profile Flat Black Cables
Say goodbye to cluttered, rigid, multi-colored internal wiring arrays. The MWE 500W V2 is equipped with flexible, sleek flat black ribbon cables. These low-profile wires run easily through narrow case panel routes, cleaning up your desktop case aesthetic while drastically increasing spatial airflow configurations around your internal components.
Resilient Operational Protections & High-Temperature Thresholds
Engineered to deliver structural safety in demanding environments, this PSU outputs full continuous power even at an operational safety temperature limit up to 40°C. Additionally, it features a complete suite of industrial-grade system protections—including Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Under Voltage Protection (UVP), and Over Temperature Protection (OTP)—guarding your PC hardware against sudden power network abnormalities.
Technical Specifications
| Hardware Parameter | Official Specifications |
|---|---|
| Product Name | Cooler Master MWE 500 Bronze 230V V2 |
| Model Number | MPE-5001-ACABW-B |
| ATX Version Support | Intel ATX 12V V2.52 |
| Total Continuous Output | 500 Watts continuous Power Capacity |
| Efficiency Rating | 80 PLUS Bronze 230V EU Certified (88% Typical Load Efficiency) |
| Power Factor Correction | Active PFC (>0.9 typical) |
| Input Voltage / Current Range | 200 - 240V AC (5A Current, 50-60Hz Input Frequency) |
| Cooling Fan Hardware | 120mm Hydro Dynamic Bearing (HDB) Fan | Max Speed 1500 RPM |
| Fan Noise Profile | 20% Load: 11.2 dBA | 50% Load: 14.6 dBA | 100% Load: 31.8 dBA |
| Industrial Protection Suite | OVP / UVP / OPP / OTP / SCP Industrial Protections |
| Physical Unit Scale | 140 x 150 x 86 mm (Standard Compact ATX Chassis Profile) |
| MTBF Lifespan Value | >100,000 Hours Mean Time Between Failures |
Fixed Cable & Interface Layout Configuration
The MWE 500W V2 comes outfitted with non-modular, low-profile flat black ribbon wires containing all standard industry connectors to plug cleanly into modern hardware components:
- 1x Main Motherboard 24-Pin Connector (1 Unit)
- 1x CPU / EPS 12V 4+4 Pin Connector (1 Unit)
- 1x CPU / EPS 12V 8-Pin Connector (1 Unit)
- 2x PCI-e 6+2 Pin Connectors (Supports mainstream dedicated graphics cards)
- 6x SATA Connectors (For high-speed solid-state drives, hard drives, and hub expansion accessories)
- 3x Peripheral 4-Pin Molex Connectors