Hikvision DS-3E1318P-EI/M 16 Port Fast Ethernet Smart POE Switch

Hikvision DS-3E1318P-EI/M 16 Port Fast Ethernet Smart POE Switch

• 16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port.
  
• IEEE 802.3at/af standard for PoE ports.
  
• Network topology management, alarm push, network health monitor.
  
• 6 KV surge protection for PoE ports.
  
• AF/AT camera can reach up to 300 m in extend mode
• General
• Shell: Metal material
• Net Weight: 1.8 kg (4.0 lb)
• Gross Weight: 3.0 kg (6.6 lb)
• Dimensions (W × H × D): 335.00 mm × 44.50 mm × 226.00 mm (13.19'' × 1.75'' × 8.90'')
• Operating Temperature: 0 °C to 45 °C (32 °F to 113 °F)
• Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity: 5% to 95% (no condensation)
• Relative Humidity: 5% to 95% (no condensation)
• Power Supply: 100-240 VAC, 50/60 Hz, Max. 2.5 A
• Installation Mode: Rack (equipped with mounting ears)
• Max. Power Consumption; 150 W
• Power Consumption In Idle: 20 W
• Surge Protection; 6 KV

• Network Parameters
• Ports: 16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port
• MAC Address Table: 16 K
• Switching Capacity: 9.2 Gbps
• Packet Forwarding Rate; 6.84 Mpps
• Internal Cache; 4 Mbits

• PoE Power Supply
• PoE StandardI; EEE 802.3af,IEEE 802.3at
• PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE Port: PoE: Ports 1 to 16
• Max. Port Power: 30 W
• PoE Power Budget: 130 W

• Software Function
• Long Range

  Ports 1 to 16: up to 300 m.

  Long range performance may vary depend on camera model or cable condition.

• VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
• Link Aggregation

  Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

  Support static link aggregation.

  Support 1 aggregation groups.

• HPP

  Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

  1. Display the port rate.

  2. Display the port bandwidth utilization rate.

  3. Display the PoE power usage.

  4. Display topology information.

  5. Display the alarm status.

  6. Restart ports and devices.

  7. Enable port long-rage mode.

  8. Remotely upgrade the device.

• PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
• System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, and basic network parameter configuration.

• Approval
• EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
• SafetyUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
• ChemistryCE-RoHS (2011/65/EU)
• Warranty; 2 Year