Hikvision DS-3E1310HP-EI 8 Port Fast Ethernet Smart POE Switch
- 8 × 100 Mbps PoE RJ45 ports, 2 × gigabit network RJ45 ports
- IEEE 802.3at/af/bt standard for PoE ports
- Network topology management, and alarm push
- 6 KV surge protection for PoE ports
- Up to 300 m long-range transmission
- AF/AT camera can reach up to 300 m in extend mode
- General
- Shell: Metal material, IP40
- Net Weight: 0.550 kg (1.21 lb)
- Gross Weight: 0.950 kg (2.09 lb)
- Dimensions (W × H × D): 217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
- Operating Temperature: 0 °C to 40 °C (0 °F to 104 °F)
- Storage Temperature; -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity: 5% to 95% (no condensation)
- Relative Humidity; 5% to 95% (no condensation)
- Power Supply: 54 VDC, 2.22 A
- Installation Mode: Desk-Mounted,Wall-Mounted
- Max. Power Consumption: 120 W
- Power Consumption In Idle: 4 W
- Surge Protection: 6 KV
- Network Parameters
- Ports: 8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
- MAC Address Table: 16 K
- Switching Capacity; 9.2 Gbps
- Packet Forwarding Rate: 6.84 Mpps
- Internal Cache4 Mbits
- PoE Power Supply
- PoE StandardI: EEE 802.3af,IEEE 802.3at,IEEE 802.3bt
- PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE Port; Hi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
- Max. Port Power: Port 1 to 2:90 W Ports 3 to 8:30 W
- PoE Power Budget: 110 W
- Software Function
-
Long Range
Ports 1 to 8: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
- PoE Watchdog: Ports 1 to 8: auto detect and restart the cameras that do not respond.
-
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
-
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating.
- Approval
-
EMC
FCC (47 CFR Part 15, Subpart B);
CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);
IC (ICES-003: Issue 6);
RCM (ASNZS CISPR 32: 2015)
-
Safety
UL (UL 60950-1);
CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);
CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
-
Chemistry
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006)
- Warranty; 1 year