• Measurement Technology: Time Domain Reflectometry (TDR)
• Cable Measurements : Cable Testing and ID: up to 1000 ft (305 m)
• Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
• Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
• Supports 8 continuity and ID number remotes (RJ-45)
• Supports 20 RJ-45 and 20 F-connector ID only remotes
• Power over Ethernet: Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
• Loads cable up to 25.5 watts(at class 4) Identifies Mode A or B (pairs with PoE)
• Active Ethernet: Indicates advertised speeds of 10/100/1000base-t half or full duplex. Can Link to network at 10/100base-t
• Maximum Voltage: Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester. RJ Jack: 66 Vdc or 55 Vac, F-connector: 50 Vdc or Vac
• Save Test Results: Stores up to 250 Cable or network tests with user defined names
• Tone Generation: Tone Frequencies: 730 Hz and 1440 Hz
• Languages: English, French, Spanish, German, Italian
• Battery Life: For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery: Operating – 20 hours typical Standby – Life of battery (20uA max) Batteries are included
• Altitude: 10,000 ft (3048 m) operating
• Temperature: Operating: 32 to 122°F (0 to 50°C)
• Storage: -22 to +140°F (-30 to 60°C)
• Humidity: 10 to 90% non-condensing
• Enclosure: High-strength PC/ABS plastic with V0 rating with boot
• Withstands 4 foot drop on to concrete
• Size: 1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)
• Safety Compliances: CE
• Weight with Batteries: 1 lb 2 oz (510 g)
• Warranty: 1 Year

The Net Prowler™ Cabling and Advanced Network Tester takes all the features and
functionality of the Cable Prowler™ and adds the capability to identify, monitor, and troubleshoot LAN issues associated with physical layer and link conditions in the  network.

Network Testing - PoE Testing

Detects and reports advertised and current link speed and link speed

Ping both IPV4 and IPV6 addresses

 Detects the presence of VLANs
CDP/LLDP/ NDP and VLAN identification provides network

configuration information 

Ping specific URL to verify WAN connectivity

Blinks link light to identify location on a hub/switch/router port

Detects presence of PoE and class of PoE per IEEE 802.3af/at with
load test for voltage drop

Physical Features

High resolution full color graphical display
Displays wire map in color per TIA-568A/B color codes, in pin or
pair order (configurable)
Protective rubber boot
Micro USB connector (to export cable reports), RJ45 connector,
and coax connector

Net Prowler Application

Preview test results as PDF or CSV
Perform throughput test using the Net Prowler
• Update Net Prowler Firmware