Description
Hikivision 8 Port Fast Ethernet Smart POE Switch
Hikivision 8 Port Fast Ethernet Smart POE Switch
8 Port Fast Ethernet Smart PoE Switch Overview
General Specifications:
- Shell Material: Metal
- Net Weight: 0.54 kg (1.19 lb)
- Gross Weight: 1.08 kg (2.38 lb)
- Dimensions (W × H × D): 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
- Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity: 5% to 95% (non-condensing)
- Relative Humidity: 5% to 95% (non-condensing)
- Power Supply: DC54 V, 1.2 A
- Installation Mode: Desk-Mounted, Wall-Mounted
- Max. Power Consumption: 65 W
- Power Consumption in Idle: 3.2 W
- Surge Protection: 6 KV
Network Specifications:
- Ports: 8 × 10/100 Mbps PoE ports, 2 × Gigabit RJ45 ports
- MAC Address Table: 4,000 entries
- Switching Capacity: 5.6 Gbps
- Packet Forwarding Rate: 4.17 Mpps
- Internal Cache: 2 Mbits
PoE (Power over Ethernet) Specifications:
- PoE Standards: IEEE 802.3af, IEEE 802.3at
- PoE Power Pin: End-span: 1/2(-), 3/6(+)
- PoE Ports: Ports 1 to 8
- Max. Port Power: 30 W per port
- Total PoE Power Budget: 60 W
- Long Range PoE Transmission: Up to 300 meters (performance may vary depending on camera model or cable condition)
Software and Features:
- VLAN Support: 802.1Q VLAN, configurable VLAN ID from 1-4094, supports Trunk and Access port modes
- PoE Watchdog: Auto detects and restarts unresponsive cameras on ports 1 to 8
- Loop Prevention: Supports 802.1D STP and 802.1w RSTP; prevents network loops
- Port Isolation: Ports 1 to 8 can be isolated from each other to enhance network security
-
Hik-Partner Pro Integration: Supports one-click activation and remote management, including:
- Port rate display
- Port bandwidth utilization
- PoE power usage
- Topology information
- Alarm status
- Port and device restart
- Long-range mode activation
- Device remote upgrade
-
System Maintenance:
- Device management via web interface
- DHCP Client (enabled by default)
- Fixed IP address (10.180.190.200) for direct access
- Management via Hik-Central Pro
- Remote management via Hik-Partner Pro
- Cable detection
- 802.1ab LLDP for peer device discovery
- Port mirroring for fault locating
Approval and Compliance:
- EMC (Electromagnetic Compatibility): CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- Safety: CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
-
Chemistry: CE-RoHS (2011/65/EU); WEEE (2012/19/EU); REACH (Regulation (EC) No.1907/2006)
- Warranty: 2 Years